2024 Landoll 930E Series 930E-48-15

2024 Landoll 930E Series 930E-48-15

Swipe to View More

  • Year 2024
  • Make Landoll
  • Model 930E Series
2024 Landoll 930E Series 930E-48-15

2024 Landoll 930E Series 930E-48-15

2024 Landoll 930E Series 930E-48-15

930E TRAVELING TAIL TRAILER

MAXIMIZE PAYLOAD AND PROFITABILITY

The 930E Traveling Tail is part of the 900 E-Series trailers. The tail is capable of lifting 24,000 lbs up to 53" dock height. Maximize your loads by utilizing the entire deck and maximize your payload by having the undercarriage five feet behind the main hinge. The longer wheelbase gives you proper weight distribution between tractor and trailer and fully supports the tail.

The traveling tail concept allows for stable dock loading and increases your payload by having a longer wheelbase.

WHY OWN A 900 E-SERIES

Quick, simple, safe operation and a longer wheelbase that increases payload. A 15' tail reduces the load angle to a low 11°. Frames are steel shot blasted in preparation for the TGIC polyester powder coat paint finish standard on 900 E-Series trailers. The tail can raise and lift 24,000 lbs up to 57" dock height. The 900 E-Series trailers are backed by a 5-year structural warranty.

WORK WITH EASE

The low-load tail angle ensures easy clearance for loading low-sitting equipment, providing seamless loading capabilities. The hydraulic control allows for efficient and convenient loading and unloading operations, all managed through a single control point.

Features may include:

FRAME & GENERAL
  • Capacity: 35 Ton (70,000 lbs.)
  • Deck Rating: 50,000 lbs. in 10'
  • Estimated Base Weight: 16,300 lbs. (48') +/-3%
  • Main Frame: Fabricated 80,000 PSI Yield 4-Beam Design
  • Crossmembers: 4" Junior I-Beam and 3" Junior I-Beam on 8" Centers
  • Slope Drop: 90°
  • Parking Stands: Jost Two Speed Landing Gear
  • Pin Setting: 18"
  • Swing Clearance: 84"
  • Hitch: Fifth-Wheel Kingpin
  • Deck Width: 102"
  • Loaded Deck Height: 38"
  • Loaded Ground Clearance: 20"
  • Decking: 1-3/8" Nominal Apitong (Lower Deck)
  • Tool Box: Twin Upper Deck Mounted Top-Opening with Non-Weight Bearing Lid Illuminated
  • Tie Downs: Double Key Hole Chain Slot / Gotchas on 16" Centers / (6) Double Keyhole Chain Slots on Tail / (2) D-Rings Lower Slope at Deck
  • Tail Lifting Capacity: 24,000 lbs.
  • Load Angle: 11° with 15' Tail
SLOPE RAMP
  • 6' x 102" Upper Deck Ramp (Air operated) (10,000 lbs. capacity) (11.5° load angle)
SUSPENSION & UNDERCARRIAGE
  • Suspension: Neway Air Ride RLU228, 22,500 lbs. Capacity with Manual Dump Valve
  • Undercarriage: Centralized Grease System
  • Axles: (2) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Outboard Brake Drum, Automatic Slack Adjusters

Wheels & Tires

Tires, Rear Specification (8) 235/75R 17.5 LRJ Double Coin

Chassis

Axle Count 2

Dimensions

Length 48' | Tail: 15'
Dimensions Deck: 102" x 38’ 3"

Capacities

Cargo Capacity 35 Ton

Weights

Weight Base: 18,770 lbs. (+/- 3%)

Product Photography